How to Use a Torque Wrench Like a Pro

 

A torque wrench is a must-have tool if you have bolts and nuts to turn. Click here to learn how to use a torque wrench like a pro.

When you have a tough job to do, you’ll need the best tools¬†for getting the job done right. There are tools for everything, each designed for a particular use.

One of the most important tools you need to have in your toolbox is a torque wrench. This essential gadget is used to apply extreme pressure on a bolt or lug nut.

Learning how to use a torque wrench is simple enough, but first you’ll need to know a few key tips. This article can help. Keep reading to better understand how to get the most out of this unique tool.

  1. Adjusting the Tightener

The tightener is the part of the torque wrench that allows you to make adjustments to the amount of torque you want to apply to the nut.

Keep in mind that a torque wrench is designed specifically to prevent you from over-tightening the nut and possibly breaking it. Thus, the importance of applying the exact right amount of tension. The tightener makes this easy.

First, read the owner’s manual for your car to determine the exact amount of torque to apply.

Next, adjust the wrench to the tension level dictated by the manual.

  1. Lock in the Proper Amount of Torque

Once you’ve adjusted the tightener to the proper torque, you’re ready to lock it in. This is a simple matter of turning the lock mechanism until it’s nice and secure. Be sure that it’s snug and won’t slip while in use.

Now you’re ready to get to work.

Be aware that another important step in the process is to check your tool for proper torque wrench calibration.

  1. Tighten Nuts in Sequence

When tightening the nuts on your car, the best practice is to tighten them in sequence. Most mechanics would recommend moving in a clockwise rotation as you progress from nut to nut around the wheel.

As you move from nut to nut, you’ll notice the wheel beginning to snug up into place, tighter and tighter against the wheel plate.

Pay clay attention that the wheel is mounted flush against the wheel plate so that it will turn properly once all the lugs are fully tightened.

  1. Check the Reading

Once all the lugs are tight, take a moment to check the torque reading on your wrench. If the reading tells you that the pressure is too tight or not tight enough, you might need to make small adjustments on the dial.

  1. Make Small Adjustments as Needed

To do this, unlock the tightener, make any necessary adjustment on the dial, and then loosen or tighten the lugs as needed.

Now check the reading again. Once the torque on all lugs look good, you’re all set.

Key Tips for How to Use a Torque Wrench

Learning how to use a torque wrench isn’t complicated. The key is to understand the tips contained in this article. Always be sure to consult the owner’s manual before beginning any task, and follow the instructions precisely.

Keep scrolling to see more great construction tips and advice.

This entry was posted in Vendor News. Bookmark the permalink.
Questions - we're here to help
F&J Publications, LLC
P.O. Box 3908
Suwanee, GA 30024
P. 678.765.6550
F. 678.765.6551